Problem with ISDN PRI

Unanswered Question
Oct 16th, 2007
User Badges:

Hi,


I had VWIC2-1MFT-T1/E1 on my router 2811. On the other side is provider router (cisco).

I have changed my wic card with VWIC2-2MFT-T1/E1. Now I got error:

*Oct 17 07:08:08.529: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0085

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98381

Exclusive, Channel 1

Calling Party Number i = 0x2181, '16500904'

Plan:ISDN, Type:National

Called Party Number i = 0xA1, '0913885126'

Plan:ISDN, Type:National

*Oct 17 07:08:08.541: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=11

*Oct 17 07:08:08.577: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=15 nr=11

*Oct 17 07:08:08.577: ISDN Se0/0/0:15 Q931: CALL_PROC pd = 8 callref = 0x8085

Channel ID i = 0xA98381

Exclusive, Channel 1

*Oct 17 07:08:08.577: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=16

*Oct 17 07:08:08.593: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=16 nr=11

*Oct 17 07:08:08.593: ISDN Se0/0/0:15 Q931: DISCONNECT pd = 8 callref = 0x8085

Cause i = 0x82A6 - Network out of order


After some testing (didn't work anything), I have returned the old card but it was the same problem.


Why is that so and what I can do now?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion