Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
4126
Views
0
Helpful
2
Replies

: %LINEPROTO-5-UPDOWN: Line protocol on Interface

DWAM_2
Level 3
Level 3

‎10-17-2007 12:13 AM - edited ‎03-05-2019 07:08 PM

Hello,

On 2950 with version c2950-i6q4l2-tar.121-22.EA10a.tar, I have got follow messages :

Oct 12 13:47:03.971: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/29, changed state to down

Oct 12 13:47:05.971: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/29, changed state to up

Oct 12 13:51:41.957: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/34, changed state to down

Oct 12 13:51:46.169: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/34, changed state to up

Oct 12 13:52:36.828: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/34, changed state to down

Oct 12 13:52:38.836: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/34, changed state to up

Oct 13 06:11:00.154: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/38, changed state to down

Oct 13 06:11:02.174: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/38, changed state to up

Oct 13 06:11:27.218: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/38, changed state to down

Oct 13 06:11:29.226: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/38, changed state to up

Oct 15 23:19:46.948: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/38, changed state to down

Oct 15 23:19:48.960: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/38, changed state to up

Oct 15 23:20:12.772: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/38, changed state to down

Oct 15 23:20:14.772: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/38, changed state to up

We have changed cables, switch but the behaviours occur.

All ideas are welcome.

Best regards.

Labels:
0 Helpful
2 Replies 2

ankbhasi
Cisco Employee
Cisco Employee

‎10-17-2007 12:28 AM

Hi Friend,

Can you confirm what is connected to fa0/29,34 and 38 interfaces? Only these interfaces flap or any other interfaces also?

Can you also update "sh run interface fa0/29" from your switch?

Regards,

Ankur

0 Helpful

DWAM_2
Level 3
Level 3
In response to ankbhasi

‎10-17-2007 01:29 AM

Hello,

Thank you for you answer.

It takes on random interfaces.

We have changed the switch and behaviours occur again.

I have upgraded the version to the last.

On the older switch, it affects the giga interface :

Oct 10 06:14:40.498: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down Oct 10 06:14:43.806: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up

This interface is connected to another switch (backbone switch !)

The show run for this interface is :

interface FastEthernet0/29

switchport access vlan 5

switchport mode access

spanning-tree portfast

spanning-tree bpduguard enable

!

Thank you

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card