current power level 1 (on client pc)

Unanswered Question
Oct 17th, 2007


i've noticed on my ADU that my current power level is set to 1mw. ANd I'm under an access point running at 100mw. Shouldn't i also be set at 100mw? I've checked my client settings and they are set to 100mw as well.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
srahn Thu, 10/18/2007 - 04:23

What is your AP deployment, autonomous or controller? In autonomous mode, there is a command 'power client x' that can be set to force client power to a particular value.

Anonymous (not verified) Tue, 10/23/2007 - 10:04


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode