10-17-2007 05:22 PM - edited 03-15-2019 12:01 AM
Hi.
A couple of months ago I bought two 7911.
The last week I try to register one of this phones against a SIP server but I dint know how to upgrade the image from SCCP to SIP.
Someone know which files I need in my tftp to upgrade it?
Thanks
10-18-2007 03:21 AM
Hi,
the matter is that to download the SIP image files, you need to register a support contract (aka smartnet) for the phone. It is not expensive and should be available from any serious authorized cisco reseller.
Hope this helps, please rate post if it does!
10-22-2007 12:01 PM
Hi
I already download the Sip image into the phones, but those doesn't register in the Sip server. In the XML archives I also point to the Sip server IP, but nothing yet. Do I need to edit more parameters of the XML files, if so, which ones?
Any ideas
10-22-2007 12:22 PM
Hi, look at this for a guide for configuring the XML file:
http://www.voip-info.org/wiki/view/Standalone+Cisco+7941%252F7961+without+a+local+PBX
on the same site there are many articles regarding use of cisco phones with third-party SIP.
Hope this helps, please rate post if it does!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide