I'm trying to use PAT to use two public IP and map to one local IP, can anyone please help to show/correct me the access-list and nat command ?
Two public IP map to one internal IP:
access-list outside_access_in extended permit tcp any host 18.104.22.168 eq 3389
access-list outside_access_in extended permit tcp any host 22.214.171.124 eq 3389
access-list inside_nat_static_1 extended permit tcp host 192.168.0.208 eq 3389 host 126.96.36.199
access-list inside_nat_static extended permit tcp host 192.168.0.208 eq 3389 host 188.8.131.52
static (inside,outside) tcp 184.108.40.206 3389 access-list inside_nat_static
static (inside,outside) tcp 220.127.116.11 3389 access-list inside_nat_static_1
my existing config allow all internal clients use dynamic nat for outgoing:
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.255.0
My config doesn't quite working as expected, sometimes I just can't connect using both IPs.