TACACS+ PEAP and MAC in the same AP

Unanswered Question
Oct 18th, 2007

Hi,

we are having a configuration in our Access Points, which I would like to know if can create troubles, because in some AP's it works perfectly, in some others we are having issues with PEAP auth.

We have TACACS+ for the Telnet into the AP's, Mac Authentication for compatibility reasons, and are now introducing PEAP.

the aaa part looks like this:

aaa authentication login default group tacacs+ local

aaa authentication login eap_methods group rad_eap

aaa authentication login mac_methods group rad_mac

aaa authentication enable default group tacacs+ enable

but can we have troubles with the first line where is "default" ?

Jorge

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Jagdeep Gambhir Thu, 10/18/2007 - 12:35

Jorge,

No, that is not going to give you any trouble unless there is any software bug.

You will bind "method list" to a specific interface. Once done, default will ignore that interface.

Please rate if helps.

Regards,

~JG

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode