ACS 4.1 MAC Authentication in Network Access Profile

Unanswered Question
Oct 18th, 2007
User Badges:

Im configuring Agentless Authentication based om MAC addresses sent from the access switch using MAB (MAC Authent. Bypass). I got it up and running, but with just one MAC address configured in the Authentication rule. When I try to configure more than one address in the rule, I get an error saying this is not a MAC address. How do you separate the MAC entries in the same Authentication rule. The doc says you can configure 10.000 addresses in one rule.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Premdeep Banga Thu, 10/18/2007 - 12:11
User Badges:
  • Gold, 750 points or more

Please ensure that you are not hitting,


CSCsk27193 : Can't use while entering multiple MAC addresses


Symptom:


Pressing "return" after each MAC address yields error messages when clicking on the "Submit" button while defning authentication configuration for Network Access Profiles Access Policies.


Conditions:


This has been observed on ACS 4.1.1(23) using Internet Explorer 6.0 and JRE 1.5


Workaround:


Separate MAC addresses with a comma (,), do not press "return" after the last MAC address has been entered.


Regards,

Prem

Actions

This Discussion