Austria dialplan

Unanswered Question
Oct 18th, 2007

Hi All,

Would appreciate some help with an issue I'm having with a new site.

Customer would like all calls that go to their main number 004355502xxxx to divert to the main reception. When I dial this number and run a debug isdn q931 I get no called number:

*Oct 18 14:51:31.828: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8 callref = 0x908D

Progress Ind i = 0x8088 - In-band info or appropriate now available

*Oct 18 14:51:32.688: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x108E

Sending Complete

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98394

Exclusive, Channel 20

Progress Ind i = 0x8283 - Origination address is non-ISDN

Calling Party Number i = 0x1180, '441825xxxxxx'

Plan:ISDN, Type:International

Calling Party Number i = 0x1183, '441825xxxxxx'

Plan:ISDN, Type:International

*Oct 18 14:51:32.780: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x908E

Cause i = 0x8081 - Unallocated/unassigned number

*Oct 18 14:52:01.932: ISDN Se0/0/0:15 Q931: TX -> CONNECT pd = 8 callref = 0x908D.

I've tried using a blank translation with a called party number mask of 500.

Any thoughts?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion