i have a asa 5510 device
int0 is connected to ISP1
int1 is connected to lan (10.100.100.0/255.255.255.0)
ASA is configured to nat(PAT) lan.
what is the problem:
i need to configure asa to route all traffic to lan 10.10.0.0/255.255.0.0 through 10.100.100.1.
i configure on device a static route:
route inside 10.10.0.0 255.255.0.0 10.100.100.1 1
the problem is if i ping 10.10.1.1 which is a valid host the asa report portmap translation creation failed for icmp source inside dst inside 10.10.1.1
if i put on a computer the gw 10.100.100.1 and i ping 10.10.1.1 it works.