10-20-2007 06:06 AM - edited 03-05-2019 07:13 PM
Hi,
I have a switch having SMI IOS(12.2(25)SEE) and of Model no- WS-C3750-48PS-S. This switch is not supporting L3 routing.
Will it work after upgrading the IOS please help me..........
10-20-2007 06:11 AM
Enter ip routing to enable routing.
10-20-2007 07:15 AM
I did this,this is supporting but its not supporitng the EIGRP routing,
"Protocol not in this image", i am getting this message.
10-20-2007 07:45 AM
Looking at the model numbers -S -SEE you have the standard image which doesn't include the routing options.
Yoe must have the enhanced image also called IP services for ip routing to work.
10-20-2007 09:25 AM
Hi Friend,
The image which you are running is SMI image which does support routing but does not support all routing protocols like EIGRP, OSPF , BGP etc.
It does support inter vlan routing i.e routing between vlans and basic routing protocol like RIP.
If you want your box to support advance routing protocols you have to upgrade your 3750 with EMI image which is also termed as davance services image.
3750 Q&A
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_qanda_item09186a00801b0971.shtml
This link will help you to upgrade
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.1_19_ea1/release/notes/OL469201.html#wp187875
HTH
Ankur
*Pls rate all helpfull post
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
