cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
889
Views
6
Helpful
8
Replies

Hunt Groups - CME

rgeno
Level 1
Level 1

Hi,

I want to configure hunt groups on CME and i have configured a Hunt Group Peer and is not working,

Please help,

8 Replies 8

paolo bevilacqua
Hall of Fame
Hall of Fame

What is not working? Phones are supposed to ring round-robin, they don't ?

Is the calling coming from pots, on which type of line and how configured?

The phones don't ring round robin at all!

Incoming called number through POTS - FXO port.

Please find attached my configuration. The Voice port 0/0/0 - FXO port is for both incoming/outgoing calls.

One thing, I would try is adding 'opx' after 'connection plar'

does the line ring ?

is it answered?

does it work calling 3600 from an ephone ?

1. yes, when the # 3031323 is called ext 3600 rings, however, it does not ring to the next extension 3601, 3602 etc....

2. When i make an outside call from PSTN to an IP Phone and hang up. Extension 3600 keeps ringing, it is not recognising when to disconnect.

3. Tried the "Connection Plar opx 3600 " and still not working

Oh, it also does not work when i call 3600 from an ephone.

I changed the Pilot to another 4-digit #: 2600 and the hunt-group configuration now works.

Is there any reason why this didn't work with an existing ephone-dn as the pilot?

I didn't noticed you had an extension DN with the same number as pilot. As you have noticed, this is not allowed.

Thanks and point taken,

I have some other problems that i will post up.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: