Setup Access to the Internet on 1811W on the switch side

Unanswered Question
Oct 22nd, 2007
User Badges:

I have setup the internet on the Wan port Fastert0/1, can ping successfully public ip address however when connecting PC on the switch side ( The router has two wan interfaces and 6 switch ports) pc configured with 192.168.0.17 255.255.255.0 default gate way 192.168.0.250 ( router's lan address) i can not get through to the internet

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 2 (1 ratings)
Loading.
lgijssel Mon, 10/22/2007 - 22:46
User Badges:
  • Red, 2250 points or more

Best would be to see your config but I can give you a few suggestions anyway:

1: Is NAT configured correctly on the router?

2: Did you configure a default route to the Internet?

3: Is there a valid DNS configured on the PC?


Please feel free to post any additional questions or information.


regards,

Leo

lgijssel Fri, 11/02/2007 - 02:56
User Badges:
  • Red, 2250 points or more

OK, so this a Cisco1800 series router with wireless. I recently configured one of these myself which is working perfectly.

I have to be off in a few minutes but when I get back I will compare the two configs and keep you posted. You seem to be quite close already.


Leo

lgijssel Fri, 11/02/2007 - 12:17
User Badges:
  • Red, 2250 points or more

Guessed I would help you most by posting my working config. Here it is.

Saves me some time as well ;-)


regards,

Leo



Attachment: 

Actions

This Discussion