10-22-2007 10:44 PM - edited 03-05-2019 07:15 PM
Console> (enable) copy bootflash:cat6000-sup720k8.8-6-2.bin tftp
IP address or name of remote host [192.168.1.100]?
Name of file to copy to [cat6000-sup720k8.8-6-2.bin]?
the source file size is 18963896
The maximum file size supported by TFTP is 16M. Please use RCP.
Console> (enable) copy bootflash:cat6000-sup720k8.8-6-2.bin tftp
IP address or name of remote host [192.168.1.100]?
Name of file to copy to [cat6000-sup720k8.8-6-2.bin]?
the source file size is 18963896
The maximum file size supported by TFTP is 16M. Please use RCP.
Console> (enable) RCP?
Unrecognized keyword!
Console> (enable) rcp?
Unrecognized keyword!
Console> (enable)
onsole> (enable) dir bootflash:
-#- -length- -----date/time------ name
1 18963896 Jul 24 2007 20:15:17 cat6000-sup720k8.8-6-2.bin
46571976 bytes available (18964024 bytes used)
1) Is there any trap / gotcha wit this?
2) How do I get RCP? Is it part of CiscoWorks?
10-22-2007 10:52 PM
This is merely a syntax issue. You must replace the keyword "tftp" by rcp.
The link below is for the 4000-series switches but it describes the procedure accurately:
regards,
Leo
10-22-2007 11:04 PM
Leo,
I tried your suggestion and this what happens - probably because my server is a TFTP server. So where do I get RCP server software.
=============================================
Console> (enable) copy bootflash:cat6000-sup720k8.8-6-2.bin rcp?
rcp Copy from file to RCP server
Console> (enable) copy bootflash:cat6000-sup720k8.8-6-2.bin rcp?
rcp Copy from file to RCP server
Console> (enable) copy bootflash:cat6000-sup720k8.8-6-2.bin rcp ?
Console> (enable) copy bootflash:cat6000-sup720k8.8-6-2.bin rcp ?
Console> (enable) copy bootflash:cat6000-sup720k8.8-6-2.bin rcp
IP address or name of remote host [192.168.1.100]?
Name of file to copy to [cat6000-sup720k8.8-6-2.bin]?
Username null is not valid
Error while uploading - Username null is not valid
Console> (enable)
10-22-2007 11:28 PM
Did a:
set rcp username stanisal
Console> (enable) show rcp
rcp username for VMPS :
rcp username for SysInfoLog :
rcp username for others : stanisal
Console> (enable) copy bootflash:cat6000-sup720k8.8-6-2.bin rcp
IP address or name of remote host [192.168.1.100]?
Name of file to copy to [cat6000-sup720k8.8-6-2.bin]?
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC)
I did not expect to work because my Windows XP 192.168.1.10 has no RCP program installed. So where did this file go.
10-22-2007 11:37 PM
Where can I get a copy of RCP program for Windows XP with instructions on how to install and configure it.
10-22-2007 11:57 PM
Used FTP and that worked OK.
10-23-2007 03:45 AM
Just get a different tftp server , go here this works fine we have transferred sup 720 images with it and we all know how huge those are like almost 80 meg in size , the programers must have worked at microsoft . :-)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: