ASA 5505 IPSEC VPN Problem

Unanswered Question
Oct 22nd, 2007
User Badges:

I have ASA 5505 with ASDM 5.2(2) & ASA 7.2(2).

I configure the IPSEC VPN via the wizard of ASDM and it works.

After a few times, it doesn't work anymore without change. When I log on the ASA and I activate the debug, I don't see any packets.

If I activate the TCP IPSEC on the port 10000, when I made a telnet, I see the packet on the appliance ( debug active ).

Do you have already meet this behaviour ?

Have you a solution or a procedure to reactivate the IPSEC UDP ?

Thank you

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ddugailliez Sun, 10/28/2007 - 15:03
User Badges:

find in attachment the configuration file of the ASA.

The external interface is directly connected to the external where all traffic is allowed to the appliance.

I test the VPN IPSEC L2TP with a Windows client and the pre shared key is configured on both side. But nothing in the debug log.

Do you have a solution ?

Thank you



This Discussion