MGCP CCM 5.x Router2811 NOT REGESTERING

Answered Question
Oct 23rd, 2007
User Badges:
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.7 (3 ratings)
Loading.
Rob Huffman Tue, 10/23/2007 - 09:31
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Andre,


It's likely the Domain name issue outlined in this doc (I noticed that your config is set at the default - router);


MGCP Gateway Registration Failure with Cisco CallManager


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805a316c.shtml#prob


Hope this helps!

Rob

jbarcena Tue, 10/23/2007 - 11:46
User Badges:
  • Red, 2250 points or more

Check the Application log in the CCM server, that's how you can see which name is the CCM receiving and just use the exact same name in the GW configuration page.

labredes1 Wed, 10/24/2007 - 00:31
User Badges:

Hi,

in the CCM i put the ip address of the gateway and not the domain name... Might this be the problem?

I don't know how to see the application log on the CCM...


Andre' Santos

labredes1 Wed, 10/24/2007 - 00:38
User Badges:

Hi again,

that was the problem...I realy had to have the host name instead of the ip address of the gateway,although i thought it be better to use IP.


Thanks a lot all of you


André Santos

Actions

This Discussion