3560 PoE-48 Version 12.2(25)SEB4

Answered Question
Oct 23rd, 2007
User Badges:

I'm trying to find Version 12.2(25)SEB4 on the website, but I cannot find this IOS version. Our other switches have this image and we would like to keep them alike. Can you help me find Version 12.2(25)SEB4?

Correct Answer by fargier about 9 years 8 months ago

switch#dir flash:


see the name of the IOS version


Use tftp server on your computer


switch#copy flash:name_of_IOS_File tftp://x.x.x.x/name_of_IOS_File


where x.x.x.x is the ip of your tftp server


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
szahid Tue, 10/23/2007 - 09:49
User Badges:
  • Silver, 250 points or more

Mike :

That image has been taken off from CCO. If you must have that image , please open a TAC case and have your engineer post it for you.


Thanks


royalblues Tue, 10/23/2007 - 11:08
User Badges:
  • Green, 3000 points or more

If you have this image on other switches, just copy the IOS file from one of the switches and upload.


Alternativley you can setup device itself to act as a TFTP server and upload directly if you have the IP reachability

use the command to make your device a TFTP server

tftp-server flash:


HTH

Narayan

djgizmo250 Mon, 10/29/2007 - 13:49
User Badges:

How do I copy the IOS from the other switches that we have?

Correct Answer
fargier Tue, 10/30/2007 - 02:03
User Badges:

switch#dir flash:


see the name of the IOS version


Use tftp server on your computer


switch#copy flash:name_of_IOS_File tftp://x.x.x.x/name_of_IOS_File


where x.x.x.x is the ip of your tftp server


djgizmo250 Tue, 10/30/2007 - 10:38
User Badges:

Is it save to perform this with a production switch? My initial thought is yes, but I just want to make sure. Thanks!

royalblues Tue, 10/30/2007 - 12:19
User Badges:
  • Green, 3000 points or more

You should be good to go with this. There should not be any performance impact on the production network due to this.


Narayan

djgizmo250 Tue, 10/30/2007 - 15:19
User Badges:

Entered command:

copy flash:c3560-ipbase-mz.122-25.SEB4 tftp://192.168.241.100/c3560-ipbase-mz.122-25.SEB4


Next line shows:

Address or name of remote host []? 192.168.241.100


Next line shows:

Destination filename [c3560-ipbase-mz.122-25.SEB4]?


After hitting enter, I get:

%Error reading flash:c3560-ipbase-mz.122-25.SEB4 (Is a directory)


What am I doing wrong?

djgizmo250 Tue, 10/30/2007 - 15:34
User Badges:

Where can I find the .tar package?


How can I move the .bin file I just pulled from one our switches to another switch?

Actions

This Discussion