×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

VG224 needs CCM4.2 and above to support sccp for analog ports?

Unanswered Question
Oct 23rd, 2007
User Badges:

Do we really need CCM4.2 and above in order to support VG224 to use SCCP to register analog ports. This link indicates so. http://www.cisco.com/en/US/customer/products/ps6441/products_feature_guide09186a0080483a76.html#wp1043332


Prerequisites for SCCP Analog Ports

.Cisco Unified Communications Manager 4.2 or later must be installed and configured

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Wed, 10/24/2007 - 06:14
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi CF,


I don't think so. SCCP has been supported with the VG224 and CCM since the 3.3.x train. Perhaps there are some new features that would work only with CCM 4.2 but that should be it;


Cisco VG 224 Analog Phone Gateway


Cisco Unified CallManager 3.3.3 SR2 or higher version


http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html


Hope this helps!

Rob

Actions

This Discussion