cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
258
Views
0
Helpful
1
Replies

VG224 needs CCM4.2 and above to support sccp for analog ports?

ciscoforum
Level 1
Level 1

Do we really need CCM4.2 and above in order to support VG224 to use SCCP to register analog ports. This link indicates so. http://www.cisco.com/en/US/customer/products/ps6441/products_feature_guide09186a0080483a76.html#wp1043332

Prerequisites for SCCP Analog Ports

.Cisco Unified Communications Manager 4.2 or later must be installed and configured

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi CF,

I don't think so. SCCP has been supported with the VG224 and CCM since the 3.3.x train. Perhaps there are some new features that would work only with CCM 4.2 but that should be it;

Cisco VG 224 Analog Phone Gateway

Cisco Unified CallManager 3.3.3 SR2 or higher version

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html

Hope this helps!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: