10-23-2007 01:52 PM - edited 03-15-2019 06:59 AM
Is there a way to block specific inbound numbers via the UC520. I have a customer who wants to block all 800, 866, unknow and private numbers coming into the UC520?
Solved! Go to Solution.
10-23-2007 02:03 PM
Use Translation rules that will work just like in regular CME, give it a try.
config t
voice translation-rule 1
rule 1 reject /#/
rule 2 reject /#/
*where # is the number that you wish to block.
config t
voice translation-profile BLOCK_NUMBER
translate incoming 1
Assign this translation profile to the incoming dial-peer that you are using.
HTH
//Jorge
10-23-2007 02:03 PM
Use Translation rules that will work just like in regular CME, give it a try.
config t
voice translation-rule 1
rule 1 reject /#/
rule 2 reject /#/
*where # is the number that you wish to block.
config t
voice translation-profile BLOCK_NUMBER
translate incoming 1
Assign this translation profile to the incoming dial-peer that you are using.
HTH
//Jorge
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: