Tx Power Level on AP1100

Unanswered Question
Oct 25th, 2007
User Badges:


I changed the Tx power level on my AP from Global- 1 to custom -3. for both 802.11a & b/g. After this i noticed our internet stopped (VSAT modem). Not sure why the internet stopped, after 12 hours, i decided to change the Tx back to global and voila, inernet was back in 3 mins. The Wlan controller, router, AP and link from modem are all connected to a 2950 switch.

What is/are the effecta of chaning the Tx to custom and could this change have caused the problem or was it just a coincidence?

Can WLAN controllers do any routing.I was thinking of giving port 4 a public IP and connect directly to a router/modem.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Scott Fella Thu, 10/25/2007 - 06:24
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Can't do routing.... and don't know why changing the TX would affect the modem. Are you sure when you changed it to 3 that users were still associating to the AP?


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode