10-25-2007 01:38 AM
Hi sirs,
I need to know if someone can help me with the meaning of the options of the flow options command under the llama (debug) mode. On the CCO I found only the 0x103, are there other options? What's their meaning?
Thx
davide
Solved! Go to Solution.
10-30-2007 07:19 AM
there is none.
The CSS does not offer this functionality.
The ACE module does.
Gilles.
10-25-2007 05:09 AM
CSS11503-2(debug)# flow options ?
00000020 Trace Route Changes
00000010 Simulate DOS Attack
00000008 Trace Spoof List
00000004 Trace Source IP Address
00000002 Trace UDP Flows
00000001 Trace TCP Flows
CSS11503-2(debug)# flow options
10-30-2007 02:50 AM
Thanks,
but I need to know if there is a command which output is similar to the show flows, becuse the flow option 0x103 give me so much information that I don't need to have.
Thanks
10-30-2007 04:24 AM
I feel like you're trying to find a way to log an entry for each connection you get.
Some logging functionality.
We do not recommend to use the flow trace for that.
This is a debugging tool, and should only be used to trace issues and should be turned off once the problem has been resolved.
Gilles.
10-30-2007 07:13 AM
Hi Gilles,
thanks for your suggestion, do you know which is the logging command to use for our purpose?
Bye
davide
10-30-2007 07:19 AM
there is none.
The CSS does not offer this functionality.
The ACE module does.
Gilles.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide