We have 7204 vxr router with G1 prossesing card int.When we did through output test we are only getting 210M for TCP and 820M for UDP which is realy concerns, by Cisco it should be near 512M.
Any sugesstions ?
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-JS-M), Version 12.2(14)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Mon 27-Jan-03 23:28 by dchih
Image text-base: 0x60008BB0, data-base: 0x61898000
ROM: System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-JS-M), Version 12.2(14)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
7200-CC-1 uptime is 1 year, 19 weeks, 1 day, 21 hours, 47 minutes
System returned to ROM by power-on
System restarted at 16:07:04 BST Mon Jun 12 2006
System image file is "disk2:c7200-js-mz.122-14.S.bin"
cisco 7204VXR (NPE-G1) processor (revision A) with 245760K/16384K bytes of memory.
Processor board ID 23672938
Unknown CPU at 700Mhz, Implementation 1025, Rev 0.2, 512KB L2 Cache
4 slot VXR midplane, Version 2.3
Last reset from power-on
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
6 Gigabit Ethernet/IEEE 802.3 interface(s)
509K bytes of non-volatile configuration memory.
62976K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102