cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
319
Views
0
Helpful
6
Replies

7204 through output

mohammedrafiq
Level 1
Level 1

Hi,

We have 7204 vxr router with G1 prossesing card int.When we did through output test we are only getting 210M for TCP and 820M for UDP which is realy concerns, by Cisco it should be near 512M.

Any sugesstions ?

Regards,

sh ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-JS-M), Version 12.2(14)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Mon 27-Jan-03 23:28 by dchih

Image text-base: 0x60008BB0, data-base: 0x61898000

ROM: System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1)

BOOTLDR: 7200 Software (C7200-JS-M), Version 12.2(14)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

7200-CC-1 uptime is 1 year, 19 weeks, 1 day, 21 hours, 47 minutes

System returned to ROM by power-on

System restarted at 16:07:04 BST Mon Jun 12 2006

System image file is "disk2:c7200-js-mz.122-14.S.bin"

cisco 7204VXR (NPE-G1) processor (revision A) with 245760K/16384K bytes of memory.

Processor board ID 23672938

Unknown CPU at 700Mhz, Implementation 1025, Rev 0.2, 512KB L2 Cache

4 slot VXR midplane, Version 2.3

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

1 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

6 Gigabit Ethernet/IEEE 802.3 interface(s)

509K bytes of non-volatile configuration memory.

62976K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).

16384K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x2102

6 Replies 6

paolo bevilacqua
Hall of Fame
Hall of Fame

Hi,

if you connect the systems for TCP test directly without router, do you get a different result ?

Hi,

when we replaced 7204 with 3750-G switch then its hits near a Gig.

Regards,

For the TCP case, do you have drops on interfaces? Check with clear counters first.

The interface is clean on the router which we running test, however on other live router we do have overrunn errors incrementing.

Regards,

Pls send config for test router and show interface taken while test is running.

Hi, Thanks for you help, we have resolved the issue by replacing 7204 with 3750 switch,

Regards,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: