10-25-2007 06:43 AM - edited 07-03-2021 02:49 PM
I look registration rejected on ipphone and the CCM version 4.1 not appear in device default, what can I do?
Solved! Go to Solution.
10-26-2007 05:37 PM
Will need to install this devpack either via VNC or at the computer console itself as via remote desktop connection is not supported.
Install the devpack on all servers in the cluster then reboot each of them. Upgrade the publisher first.
10-25-2007 06:45 AM
Make sure on the controller that you are using the setting for the newer version of admission control for 7920/7921 phones.
10-25-2007 11:30 AM
Dennis
I download the firware 1.0.1 to CCM v4.1.sr2, but not appear on Device Defaults, What Can I do?
10-25-2007 11:56 AM
Give me the details. Access Points used, Wireless LAN Controller used, version of code on the WLC, phone that is used. The setting I was talking about earlier is on a Cisco wireless lan controller.
10-25-2007 12:25 PM
Dennis
the acces point is SYMBOL and the concentrator is SYMBOL, is it the problem?
10-25-2007 12:27 PM
We don't officially support 3rd party AP solutions, but "should" work fine w/ some caveats. So would be best effort support. Not sure if Symbol supports WMM, etc.
10-25-2007 12:55 PM
MIchael
the WLAN controller support Wi-Fi multimedia extensions like WMM-power save with admission control and the net is with access port
10-25-2007 01:21 PM
Michael
..I have only one wi-ipphone cisco 7921g,in the network...before sell anothers. the message registration rejected could be refer to the access port?
10-25-2007 01:38 PM
Registration rejected is not a WLAN issue.
Should be able to verify this by pinging the phone. So if you are not able to configure a 7921 in your CM, then you need to load the devpack.
10-25-2007 01:47 PM
Michael
I download the cmterm-7921-sccp.1-0-1.exe on the CCM (TFTP server), but the phone no appear on the device defaults, the w-iphone receive ip, from the callmanager I can do ping to the phone, and validate the TFTP in form manual on the w-ipohone
10-25-2007 01:50 PM
That is not the correct file. That is only 7921 firmware. That doesn't enable 7921 support on the CallManager.
See my previous posting tellnig you to install the CM devpack.
So yes if you can ping the CM, then not a WLAAN issue.
Install the devpack and you should be good.
10-25-2007 01:51 PM
Also don't use 1.0.1, the latest recommend firmware is 1.0.4, which is available @ http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser-crypto.
10-25-2007 12:25 PM
This has nothing to do with the WLAN side, but has to do w/ the CallManager side.
If you don't see 7921 in device defaults, then you don't have support for 7921 and will need to load the latest devpack to enable support. Minimum supported version is 4.1(3) but will need to add the latest devpack (ciscocm.4-1-DevPack-56.exe).
10-25-2007 01:58 PM
Mike,
I am bailing out on this one as it is not a WLAN issue at all.
10-25-2007 02:04 PM
Michael
I execute the file .exe on the CCM, but the not appear there, maybe I must restart the server. the message is the same
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide