cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
330
Views
5
Helpful
3
Replies

Issue with ASA VPN and NAT configuration

cirvam123
Level 1
Level 1

Hi I have a ASA that I'm trying to setup a VPN for roaming clients on and have them access the network. Right now I get issues with No translation group found and no matter what I do it doesn't seem to fix the problem. Attached is my current config if anyone thinks they can help.

3 Replies 3

acomiskey
Level 10
Level 10

access-list nonat permit ip 192.168.101.0 255.255.255.0 192.168.102.0 255.255.255.0

nat (inside) 0 access-list nonat

Thanks, that's what I thought. I thought I had tried that and it turns out that its mostly an issue with the default route on the server I was attempting to connect to.

However while it works I still have the errors appearing in the ASDM log except they have the clients internal ip (it is behind a NAT device) and then the destination. It appears to work fine however so I'm not sure if those are important?

Why don't you post one of the logs?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: