config auth-list add mic <AP mac> - what does this do?

MARK HEUZENROEDER · ‎10-25-2007

Hi,

Say I have 2 LAPs on a WLC.

Then I enter,

config auth-list add mic <AP mac>

for one of them.

Does this mean the other LAP,

1) Has it's current LWAPP tunnel disabled

2) Can't establish LWAPP tunnel next time it resets? Must I enter this command for the 2nd LAPs MAC for it's LWAPP tunnel to come up?

If I remove all commands,

config auth-list add mic <AP mac>

from the WLC, will it now allow establishment for all LAPs?

ps. My LAPs only have MIC, not SSC.

Regards, MH

Report Inappropriate Content · ‎11-01-2007

Even without this command WLC accepts Cisco LAPs with MICs. But if you add for one AP it is safe to add it for another AP also.

MARK HEUZENROEDER · ‎11-01-2007

Hi,

Not sure what you're trying to say.

I'm looking for a method to make it necessary to explicitly configure the WLC for each LAP added. I was hoping auth-list would be it but some testing showed, as you said that configuring it for 1 AP doesn't stop others LWAPP Joining.

Hence I don't understand the purpose of this command when the "mic" keyword is used.

Regards, MH