paolo bevilacqua Fri, 10/26/2007 - 03:13
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member


The 2811 is smallish for full T3. Please scale up a little. See attached perf. guideline.

Hope this helps, please rate post if it does!

Joseph W. Doherty Fri, 10/26/2007 - 17:59
User Badges:
  • Super Bronze, 10000 points or more

I have a client who has a 2811 on a fractional T3 running at 10 Mbps. Works well, this after I maxed one out at about 20 Mbps (where it hit 100% CPU). So, don't believe you be able to get full T3 throughput on one.

Cisco recommends various bundles of T1s for the 2800 series. For T3s, they appear to recommend the next larger series, the 3800s.


note the 3845 is rated for full T3.


This Discussion