Help for E.164 Help for E.164 Help for E.164

tareqrebhi · ‎10-28-2007

Dear i need to configure E.164 format how? now i don't have a gatekeeper just a gateway....

so can i do the E.164 Registeration?

my current configuration as follow:

dial-peer voice 100 pots

destination-pattern .T

translate-outgoing called 1

port 7/0:D

!

dial-peer voice 101 pots

destination-pattern .T

translate-outgoing called 2

port 7/1:D

!

dial-peer voice 102 pots

incoming called-number 63......

direct-inward-dial

forward-digits extra

!

dial-peer voice 200 voip

destination-pattern 63......

session protocol sipv2

session target ipv4:55.55.55.1

codec g711ulaw

fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none

!

dial-peer voice 103 pots

incoming called-number 87......

direct-inward-dial

forward-digits extra

!

dial-peer voice 201 voip

destination-pattern 87......

session protocol sipv2

session target ipv4:55.55.55.1

codec g711ulaw

!

===========================================

VoiceGatewa(config-dial-peer)#destination-pattern .T

VoiceGatewa(config-dial-peer)#port 7/0:D

VoiceGatewa(config-dial-peer)#register e164

ERROR-register-e164: Dial-peer destination-pattern is not a full E.164 number

VoiceGateway#sh gateway

H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1

H.323 service is up

This gateway is not registered to any gatekeeper

what i need to cmplete my task?

pranabgaya · ‎10-28-2007

looking at voip dial-peer , its SIP service want , not h323

can u clarify ur Q .

tareqrebhi · ‎10-30-2007

Dears,

I have this problem:

I configured my AS5400 as my voice GW and it is running wellâ€¦.now I have calls from and to other International carriers with prefix (962) and I can see my Destination prefix in my CDR please see attached Carries file.

My problem with AS5400 for calls from & to my LOCAL national telecom company called (JT) that if I have call from JT to my Softswitch (has number 43000000) or vice versa I could not see the prefix in my CDR please see Jordan Telecom file for details, but the calls are running well with customers just I need to create and add the prefix (962) to my local calls here in Jordan (from JT to my Softswitch or vice versa) remember my international calls have the right prefix in the CDR so no problem withâ€¦just my problem with local calls.

Example:

1. International call is running well.

Dialed number Destination prefix

33497231267 33

2. National call is not running well there is no prefix 962 for this call I need to appear and let AS5400 to send it to my Billing system.

Dialed number Source number

43000001 65511096

Dialed number Source number

65511096 43000001

I need for records to have my prefix 962 with all records:

Dialed number Source number

962- 43000001 962- 65511096

Dialed number Source number

962- 65511096 962- 43000001

any suggestions?

thank you.