10-29-2007 02:57 AM
Hello,
Some one can show the procedure to use configure SNMPv3, I want to manage Aps ans switchs using the v3
10-29-2007 06:07 AM
hope you may get help from this link;
http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/7.3/configuration/guide/snmp.html
10-31-2007 08:41 PM
hi,
the following cli commands you can use on the switches and AP.
snmp-server community
snmp-server community
snmp-server group
snmp-server user
HTH
sathappan.s
11-01-2007 01:51 AM
Hi Omar,
depending on you devices - i assume IOS - you should read the followinf document.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a00800878fa.html
The link provided from bvsnarayana03 is for CATOS!
In the post of sathappan he mentions the following:
snmp-server community
snmp-server community
But this enabels SNMP v1 or v2.
Read the document carefully and you will be able to setup a pur SNMPv3 environment
Best regards,
Frank
bvsnarayana03
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide