isdn failiure

Unanswered Question
Oct 29th, 2007
User Badges:

UK based, I have a vic2 2bri interface card. running CME 4.1. I cannot make an outgoing call, on either port I get the error Cause i = 0x82E4 - Invalid information element contents. I know that the Isdn line is good as we have used an Avaya system on the isdn2 and that works o.k. layer 1 and 2 is up and switch-type is basic net3.

if anyone has any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Mon, 10/29/2007 - 08:33
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member


Can you send the complete output of "debug isdn q931" ? You must be placing the calls with some wrong parameter, like type national instead of unknown, etc.

silex Mon, 10/29/2007 - 11:22
User Badges:

I have managed to correct the issue.

I needed compand type alaw command in the voice-port interface. many thanks for your help paolo


This Discussion