10-29-2007 08:08 AM - edited 03-13-2019 04:36 PM
UK based, I have a vic2 2bri interface card. running CME 4.1. I cannot make an outgoing call, on either port I get the error Cause i = 0x82E4 - Invalid information element contents. I know that the Isdn line is good as we have used an Avaya system on the isdn2 and that works o.k. layer 1 and 2 is up and switch-type is basic net3.
if anyone has any ideas?
10-29-2007 08:33 AM
Hi,
Can you send the complete output of "debug isdn q931" ? You must be placing the calls with some wrong parameter, like type national instead of unknown, etc.
10-29-2007 11:22 AM
I have managed to correct the issue.
I needed compand type alaw command in the voice-port interface. many thanks for your help paolo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide