10-29-2007 03:11 PM - edited 03-03-2019 05:32 AM
Dear All,
Since yesterday we have problems with our Cisco 878 SDSL router/modem. We make use of a standard script from our ISP (KPN.com). When we have uploaded the script by Windows Terminal, the router is unable to establish a ppp connection with our ISP. Virtual-access2 link is up, but the protocol is down.
Please find underneath the standard script from KPN.com. Please help we have already lost 1 day with "trial and error" and the service and support is not that great from our ISP.
Thanks in advance for your reply.
Cheers.
FYI
!
version 12.4
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
no service udp-small-servers
no service tcp-small-servers
no service dhcp
!
hostname IDSL-ADV-Cust-CPE-SDSL
!
logging rate-limit console 10 except errors
!
boot-start-marker
boot-end-marker
!
!
ip subnet-zero
ip cef
no ip dhcp-client network-discovery
!
!
ip dhcp pool IAS
import all
origin ipcp
!
!
ip name-server 194.151.228.18
ip name-server 194.151.228.34
!
!
!
!
!
controller DSL 0
mode atm
line-term cpe
line-mode auto
dsl-mode shdsl symmetric annex B
!
!
!
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface ATM0
no ip address
no shutdown
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
description To IAS over ADSL Access Router
pvc 2/32
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
ip address pool IAS
ip verify unicast reverse-path
no shutdown
no cdp enable
hold-queue 32 in
!
interface Dialer0
ip address negotiated
ip verify unicast reverse-path
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname KPN
ppp chap password xx
ppp pap sent-username kpn password xxx
ppp ipcp dns request
ppp ipcp mask request
ppp ipcp address accept
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
!
no ip http server
no ip http secure-server
!
!
control-plane
!
scheduler max-task-time 5000
end
10-31-2007 08:02 PM
10-31-2007 08:02 PM
10-31-2007 08:02 PM
10-31-2007 08:05 PM
11-01-2007 06:18 AM
Hi,
beside that the proposed config has no NAT, it appears fine. Can you send output of "show dsl interface" and "show atm PVC 2/35".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide