10-29-2007 03:21 PM - edited 03-03-2019 05:32 AM
Hi all,
I am experiencing an RSTP problem. I have two swtitches connected via wireless link, the port is in trunk mode, the native vlan is vlan 1 the problem is that bpdu's are exchanged for other vlan's but not for vlan 1, when i connect a second backup wireless link it causes the loop, it seems that there are no bpdu exchanges between switches for vlan 1, also in trunk ports i see that BPDU's for vlan 1 are sent by both switches but they do not receive any BPDU's from each other. Any explanation about thiss issue ?
Thanks in advance
10-30-2007 12:53 AM
I would need to know some things to troubleshoot this:
1. Is VLAN 1 the native VLAN of the trunk, on both sides?
2. I presume VLAN 1 is in the allowed VLANs list on both sides of the link?
3. If the native VLAN is not 1, is the native VLAN allowed on the trunk, on both sides?
4. What model of switch is it, and what version of the software?
5. Can you do a show run int for each end of each trunk link?
6. Can you do a show int xxx trunk for each end of each trunk link?
7. Can you do a show spanning-tree vlan 1 on each side of each trunk?
Kevin Dorrell
Luxembourg
10-30-2007 03:50 PM
10-30-2007 03:56 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide