10-29-2007 04:00 PM - edited 03-03-2019 05:32 AM
Has anyone ever seen or can explain this...I am connecting a 2950 sw to a 2924 sw. The 2950 switchport is Green (up/up) while the 2924 switchport is Amber (down/down). I have tried different ports on the 2924 & 2950 w/the same results, have tried varying speed/duplex configurations, have also tried different xover cables, same issue. Configs are pretty generic...I have never seen an instance where one port is green while the port its connecting too is amber. I have also tried enable/disabling spanning-tree, didnt matter.
Thank you
10-29-2007 04:04 PM
Reboot the 2924 then look in the logs and see if it fails POST. sounds like the 2924 is failing at least part of the POST.
10-29-2007 04:14 PM
Its a production switch, so reboot it for now at least, unfortunately is not an option :(
10-30-2007 09:43 AM
Fixed.
10-30-2007 09:49 AM
Go on ... put us out of our misery ... what was the problem?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: