Remote access VPN

Unanswered Question
Oct 30th, 2007
User Badges:
  • Silver, 250 points or more

All,


I try to connect to my ASA VPN head-end device from GPRS Internet connection, GSM provider allocate address from 10.0.0.0/8 and in my network I also use the 10.0.0.0/8 networks,also client get address from this private range . I can establish the VPN connection, but no traffic goes through the tunnel. The provided address from ASA was not same what I got from the provider. What can be the problem?


IP of the laptop on GPRS: 10.18.2.35/24

IP from ASA: 10.151.5.12/24

Behind ASA I have 10.0.0.0/8 but there is no 10.18.0.0/16 network


BR,

FCS


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bwilmoth Mon, 11/05/2007 - 06:57
User Badges:
  • Silver, 250 points or more

Check if the vpn pool address is on the same subnet as the public interface address. Try changing the pool address to a different subnet.

farkascsgy Mon, 11/05/2007 - 07:03
User Badges:
  • Silver, 250 points or more

Address of the laptop is 10.18.1.150/32 and I assign 10.40.5.2/24 with remote access VPN.

Specified routes are delegated to the client, but no encrypted traffic goes throuh the tunnel, internet connection works at the same time.

BR

FCS

Actions

This Discussion