Monitoring ONS chassis power failures

patrickdonlon · ‎10-30-2007

I've had a power failure on a ONS chassis which wasn't noticed by CiscoWorks LMS 2.6. The system showed it as a minor alarm. How do I monitor these alerts?

show facility-alarm status:

System Totals Critical: 0 Major: 4 Minor: 1

Source Severity Description [Index]

------ -------- -------------------

Chassis MINOR Chassis power supply B failed [6]

htarra · ‎11-05-2007

Can you capture the alarm logs and history for this node.

Let's check some more things.

1. Please retrieve the alarms by means of TL1 commands:

a) telnet 2361

b) > ACT-USER::UID:1::PID;

where: UID = user id (by default is CISCO15)

PID = password (by default is blank)

c) > RTRV-ALM-ALL:::2::,,,,,;

Please send me the output.

d) > CANC-USER::UID:3;

where: UID = user id (by default is CISCO15)

2. Could you load some default alarm profile from another ons which is fine?

a) You can do this from Provisioning->Alarm_Profiles->Alarm_Profile Editor, click

on load and choose a profile from other node that shows BAT-FAIL alarm.

b) Go to Alarm_Behavior tab and set the corresponding profile on Node_Profile, then

apply the change.