10-31-2007 02:40 AM - edited 03-03-2019 05:35 AM
Hi,
We have 7609S with redundant sup 720-3B working fine with active and standby hot position.
Now I want to club both the sup's gigaethernet interface with same ip address.
Can I do this? if yes than how
please suggess me
Solved! Go to Solution.
10-31-2007 03:10 AM
Hi Vineet,
You cannot have same ip address on both the interface individually but I believe you can configure layer 3 port channel and then assign an ip address to that port channel and finally bind both the gig interfaces to that port channel.
This link should guide you how to configure the same
Try and update if it works for you.
HTH
Ankur
*Pls rate all helpfull post
10-31-2007 03:10 AM
Hi Vineet,
You cannot have same ip address on both the interface individually but I believe you can configure layer 3 port channel and then assign an ip address to that port channel and finally bind both the gig interfaces to that port channel.
This link should guide you how to configure the same
Try and update if it works for you.
HTH
Ankur
*Pls rate all helpfull post
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: