10-31-2007 06:25 AM - edited 03-09-2019 07:10 PM
i have CSC ssm module in my lab. i forgot its username/password and also the ip address of csc module. when i tried to do reimgine the csc module, setup asks for ip address of csc module. is there is any way to recover password without knowing the ip address of CSC module.
11-06-2007 07:07 AM
This document describes how to recover a password on a Cisco ASA 5500 Series Content Security and Control Security Services Module (CSC-SSM) or the Advanced Inspection and Prevention Security Services Module (AIP-SSM) without having to re-image the device.
http://cisco.com/en/US/partner/products/ps6120/products_password_recovery09186a00807f5a59.shtml
11-18-2007 10:40 PM
still its doesn't solve the problem , its showing that ur CSC-SSM module version is older or u need to upgrade the version and the other error is , that "time out error " it couldn't contact the CSC module....
11-21-2007 02:08 AM
still the problem is the same , i have tried every thing , what is given in the procedure and still iam unable to find the solution ....could u please let me know the way to , reslove the password issure , casue , we have forgot the ip address and the user name and password of the CSC_SSM module ....
11-21-2007 03:26 AM
hw-module module 1 password-reset
11-21-2007 05:27 AM
Just had this same problem on a AIP-SSM 20 in an ASA 5520. Password-reset command would not work for me because I only had IPS version 5.x, 6.x along with ASA IOS 7.3 is requirement for command to work successfully. Therefore I performed a reimage/update to IPS 6.x which caused default account 'cisco' with default pass of 'cisco' to be re-established. But keep in mind that you must rebuild your SSM with re-imaging.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide