6509 e-series or not e-series

Answered Question
Oct 31st, 2007

I'm working on a network upgrade project and currently have a pair of 6509's at the core. To successfully perform the planned upgrades I require e-series models. The problem is that I'm not sure if the current switches are e-series or not. Is there a simple way to determine the difference?

I have this problem too.
0 votes
Correct Answer by Jon Marshall about 9 years 1 month ago

Hi Brendan

You should be able to get this from "sh ver" eg. extracts from sh ver on some of our switches.

Non-E chassis

cisco WS-C6509 (R7000) processor (revision 2.0) with 458720K/65536K bytes of memory

E chassis

cisco WS-C6509-E (R7000) processor (revision 1.3) with 458720K/65536K bytes of memory

HTH

Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Wed, 10/31/2007 - 11:55

Hi Brendan

You should be able to get this from "sh ver" eg. extracts from sh ver on some of our switches.

Non-E chassis

cisco WS-C6509 (R7000) processor (revision 2.0) with 458720K/65536K bytes of memory

E chassis

cisco WS-C6509-E (R7000) processor (revision 1.3) with 458720K/65536K bytes of memory

HTH

Jon

Actions

This Discussion