SIP/2.0 405 Method Not Allowed

Unanswered Question
Oct 31st, 2007

Hi,

I am trying to get an Aterix server to talk SIP to an AS5300.

The AS5300 is running IOS version "c5300-is-mz.123-20.bin"

When the Asterix starts talking SIP to the AS5300 the AS5300 responds with the following message

SIP/2.0 405 Method Not Allowed

The configuration on the AS5300 is:

dial-peer voice 101 voip

destination-pattern 020

session protocol sipv2

session target ipv4:1.1.1.1

session transport udp

dtmf-relay rtp-nte

codec g711ulaw

!

sip-ua

retry invite 4

retry response 3

retry bye 2

retry cancel 2

sip-server ipv4:1.1.1.1

Can someone help me please as i haven't been able to find an answer as to why this is happening?

Thanks

Paddy

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paddyxdoyle Thu, 11/01/2007 - 05:38

Hi,

Should have added the debug output from the as5300...

*Oct 31 17:18:41.805: HandleUdpSocketReads :Msg enqueued for SPI with IPaddr: 1.1.1.1:5060

*Oct 31 17:18:41.805: CCSIP-SPI-CONTROL: sipSPISipIncomingMsg

*Oct 31 17:18:41.805: CCSIP-SPI-CONTROL: sipSPISendErrorRespNoCCB

*Oct 31 17:18:41.805: Queued event from SIP SPI : SIPSPI_EV_SEND_MESSAGE

*Oct 31 17:18:41.805: sip_stats_status_code

*Oct 31 17:18:41.805: Sent:

SIP/2.0 405 Method Not Allowed

Via: SIP/2.0/UDP 1.1.1.1:5060;branch=z9hG4bK0555f89c;rport

From: ;tag=as61e3c5b9

To:

Call-ID: [email protected]

CSeq: 8669 REGISTER

Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO

Content-Length: 0

Thanks

Paddy

Actions

This Discussion