LWAPP Access Point IOS Upgrade?

Unanswered Question
Oct 31st, 2007
User Badges:

Using a 4400 Wireless Controller and WCS how do you upgrade the LWAPP IOS on Access Points to the latest version or is this even necessary? My LWAPP access points are fully functional 1131's and converted 1230's, but I would like to know what the procedure to update ios's are when a new one comes out. Do these automatically install when you update the controller software or do I need to download new IOS periodically and copy it to the controller or WCS, etc? What do you think?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Rob Huffman Wed, 10/31/2007 - 17:13
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Jim,

When a Lightweight AP is connected to the WLC it has the same Version as the WLC. For example if the WLC is running the AP is running If you upgrade the WLC to a new version the AP's are upgraded at the same time. There is no need to do anything with the AP's themselves.

Hope this helps!



This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode