10-31-2007 07:24 PM
I am working on my access router for dialup setup. I only wanted to confirm that can we use same IP Pool under different virtual-templates ??
In my setup , I will be having more than 1 tunnels & hence using seprate virtual-template for each tunnel.
config will be like this :
ip local pool VTY_Pool XX.XX.XX.1 XX.XX.XX.254
!
interface Virtual-Template2
peer default ip address pool VTY_Pool
!
interface Virtual-Template3
peer default ip address pool VTY_Pool
!
Solved! Go to Solution.
11-01-2007 12:14 AM
This will not be a problem.
You may configure this as proposed.
regards,
Leo
11-01-2007 12:14 AM
This will not be a problem.
You may configure this as proposed.
regards,
Leo
11-01-2007 02:05 PM
Hi Leo,
Thks 4 ur reply. So it means its IP Pool responsibility to keep track of free ips or allocated ips..
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: