Rob Huffman Thu, 11/01/2007 - 07:03
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Bill,


Here is a clip from CUE guru Markus from Cisco Systems;


"if you don't have a voicemail operator extension configured ("no voicemail operator telephone" from config mode in the CLI), then it will just say 'goodbye' and hang up (you can still configure zero-out extensions for individual mailboxes if you like)."



From this thread;


http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Unified%20Communications%20Applications&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddbb416/0#selected_message


Hope this helps!

Rob

whanson Thu, 11/01/2007 - 09:07
User Badges:

Thats great Rob, Can it only be done from the CLI, I don't see it anywhere as a global in the GUI

whanson Thu, 11/01/2007 - 15:39
User Badges:

rob you are peach. I found it thx again

Actions

This Discussion