PPTP & QoS using Local AAA Server

Unanswered Question
Nov 1st, 2007

Hi all,

How can I use a Cisco router as PPTP-Calls terminator without using a RADIUS server? Right now I came up with the following configuration that works partially:

version 12.4

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

aaa new-model

aaa authentication login default local

aaa authentication login PPTP-Authentication local

aaa authentication ppp PPTP-Authentication local

aaa authorization network PPTP-Authentication local

aaa attribute list 50K-Limit

attribute type sub-policy-out "50K-Limit" service vpdn

aaa session-id common

ip cef

vpdn enable

vpdn authen-before-forward

vpdn-group DefaultVPDN

! Default PPTP VPDN group

accept-dialin

protocol pptp

virtual-template 1

local name PPTP-Authentication

username test1 password 0 test1

username test1 aaa attribute list 50K-Limit

policy-map 50K-Limit

class class-default

bandwidth 50

interface Ethernet0

description LAN Interface

interface Virtual-Template1

ip unnumbered Ethernet0

ip nat inside

ip virtual-reassembly

peer default ip address pool DIAL-IN

vpdn authorization PPTP-Authentication

ppp encrypt mppe auto required

ppp authentication ms-chap ms-chap-v2

ip local pool DIAL-IN 192.168.0.1 192.168.3.254

*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

PPTP works just fine, all users are able to connect BUT - There is no policy-map attached to any of those VI's.

How can I attach a policy-map to local users using local AAA server?

Regards,

Alex.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Tue, 11/06/2007 - 14:23

What router sereis are you using? What is the version of IOS running on the rotuer?

Actions

This Discussion