CME/CUE

Unanswered Question

I am trying to get a cme/cue using the loppback address. here is a snapshot of the config and an error message but basically , I put l0 to 10.10.30.1 255.255.255.252 , the service-engine I put ip unumbered to l0

i put the service-en to ip addres 10.10.30.2 255.255.255.252

when I add the static route I get an error message 'Inconsistent address and mask'

here is the config and message

What am I missing

interface Loopback0

ip address 10.10.30.1 255.255.255.252

ip unnumbered Loopback0

shutdown

service-module ip address 10.10.30.2 255.255.255.252

service-module ip default-gateway 10.10.30.1

!

sandbox(config)#ip route 10.10.30.2 255.255.255.252 serv

sandbox(config)#ip route 10.10.30.2 255.255.255.252 service-Engine 0/1

%Inconsistent address and mask

sandbox(config)#

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
anderson-david Fri, 11/02/2007 - 02:01

Hi Mike,

your static route should look like

ip route 10.10.30.2 255.255.255.255 service-engine 0/1

ie all 255s for the mask and not a 252 at the end.

I hope this helps

Dave

Actions

This Discussion