11-01-2007 09:48 AM - edited 03-13-2019 04:40 PM
I am trying to get a cme/cue using the loppback address. here is a snapshot of the config and an error message but basically , I put l0 to 10.10.30.1 255.255.255.252 , the service-engine I put ip unumbered to l0
i put the service-en to ip addres 10.10.30.2 255.255.255.252
when I add the static route I get an error message 'Inconsistent address and mask'
here is the config and message
What am I missing
interface Loopback0
ip address 10.10.30.1 255.255.255.252
ip unnumbered Loopback0
shutdown
service-module ip address 10.10.30.2 255.255.255.252
service-module ip default-gateway 10.10.30.1
!
sandbox(config)#ip route 10.10.30.2 255.255.255.252 serv
sandbox(config)#ip route 10.10.30.2 255.255.255.252 service-Engine 0/1
%Inconsistent address and mask
sandbox(config)#
11-02-2007 02:01 AM
Hi Mike,
your static route should look like
ip route 10.10.30.2 255.255.255.255 service-engine 0/1
ie all 255s for the mask and not a 252 at the end.
I hope this helps
Dave
11-06-2007 09:32 AM
David, thanks I caught it 5 minutes after the post .. It was a long day...Thanks your post would have fixed it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: