11-01-2007 11:42 AM - edited 03-03-2019 05:37 AM
I'm fairly new to networking but we were trying to load new ios code on 2924 when it hung up. Here is what I am getting.
C2900XL Boot Loader (C2900-HBOOT-M) Version 11.2(8)SA4, RELEASE SOFTWARE (fc1)
Compiled Mon 23-Nov-98 20:59 by paulines
starting...
Base ethernet MAC Address: 00:d0:bb:d4:b0:00
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 18 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 3612672
flashfs[0]: Bytes used: 2954240
flashfs[0]: Bytes available: 658432
flashfs[0]: flashfs fsck took 85 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
" (0x0d) in name.e with illegal char "
Loading "flash:c2900xl-c3h2s-tar.120-5.WC17.tar"...flash:c2900xl-c3h2s-tar.120-5.WC17.tar: no such file or directory
Error loading "flash:c2900xl-c3h2s-tar.120-5.WC17.tar"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch:
My question is how do I break in to get to a prompt?
Solved! Go to Solution.
11-01-2007 11:48 AM
http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml
Review this link. In section "Getting no such file or directory Error Message During the Bootup"
Please rate all helpful post
11-01-2007 11:48 AM
http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800946e5.shtml
Review this link. In section "Getting no such file or directory Error Message During the Bootup"
Please rate all helpful post
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide