11-01-2007 10:36 PM - edited 03-03-2019 07:22 PM
If a customer has subscribed for a CIR of 256 Kbps and a burst of 16 Kbps , what are the Values that i shall set for
frame-relay cir , frame-relay bc , frame-relay be and frame-relay mincir in map-class frame-relay.
are there any specific Ratios (comparing with cir given)for bc and be that we need to set.
11-02-2007 08:06 AM
Take a look at this link
11-14-2007 09:32 PM
Sir,
I read the PDF available on this site.but still one doubt i have.Customer has subscribed for access-rate of 64 Kbps and Burst of 16 Kbps.
If i set CIR of 64 Kbps , bc of 8 Kbps , what is the value that i shall set for be. is it 16 Kbps or 2 Kbps so that when multiplied by the Multiplication Value bet. CIR & bc which is 8 here , then it becomes 16 Kbps total.
can you please suggest the value that i shall set for be.
11-15-2007 07:42 AM
> what is the value that i shall set for be.
You don't necessarily need to set a value for be if the telco hasn't provided. From your post, they've only provided the bc.
Your bc value should be 16000
11-16-2007 02:44 AM
i am on the Service Provider side i:e i have to set be value on my router interface for the customer,so what value for be shall i set in the map-class.
11-21-2007 03:18 AM
i am on the Service Provider side i:e i have to set be value on my router interface for the customer,so what value for be shall i set in the map-class.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide