Cannot reach my server

Unanswered Question
Nov 1st, 2007
User Badges:


I have a LAN with a netware server. The server is plugged into port FE0/22 on the Cisco 3560 cat. From the switch I can ping and telnet to the server. As soon as I try from outside I cannot ping nor telnet to the server. However from outside I can ping and telnet to the switch which indicates the router has no ACL to block the icmp packets for the address range my devices use.

The switch has a basic setup. Login username and password. Vlan1 which the server belongs to. And a Vlan200 but there is currently no device(s) connected to that vlan.

What am I missing that I cannot access the server from outside the LAN?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
willemvwyk Fri, 11/02/2007 - 00:27
User Badges:

This problem was with the Netware server. It somehow locked up and the server team rebooted the machine. All working now.

glen.grant Fri, 11/02/2007 - 01:23
User Badges:
  • Purple, 4500 points or more

Your server has no or incorrect default gateway set for the nic card . Must be the layer 3 routing interface address .


This Discussion