guruprasadr Fri, 11/02/2007 - 00:25
User Badges:
  • Gold, 750 points or more

Hello Vaibhav, [Pls Rate if HELPS]


"show ip accounting" will provide the Src IP, Destination IP , Packets, Bytes transferred.


Enable "ip accounting" on the interface, use ip accounting in interface config mode. To disable use "no" form to this command.


Refer Link below:

http://www.cisco.com/en/US/docs/ios/12_1/iproute/command/reference/1rdip.html#wp1018815


In addition, you can Use Netflow / MRTG monitoring Tool to verify the Bandwidth Used over the Link / CPU Load / CRC errors / Line Load on Interface, etc.,


Hope i am informative.


DO RATE if HELPS


Best Regards,


Guru Prasad R

Actions

This Discussion